Anti-cursor belt, also known as pre-shaped road anti-cursor belt, is a new type of reflective material made of a combination of high-molecular flexible polymers, pigments and glass beads.
Anti-cursor bands are mainly used for highway pavement indications: such as zebra crossing, center double solid line, lane dividing line, text, arrows, etc. Suitable for asphalt, cement, concrete, marble and other pavements and walls.
The main feature of the anti-cursor belt is that it is pre-formed, and the product substrate and surface have glass beads, which have good reflective and non-slip properties. The colors are bright and never fade.
The types of anti-cursor tapes can be divided into: engineering anti-cursor tapes, engineering anti-smudge tapes, temporary anti-cursor tapes, and temporary anti-smudge tapes.
Uses: Directional signs; prohibition signs, warning signs and indication signs, and signs used on ground advertising.
Life: According to road conditions, traffic flow and installation, the service life can be at least 2 years.
Engineering Grade Cursor Belt
Both the substrate and the surface of this tape have glass microbeads, which have the effect of reflecting light and sliding. Generally, there are two types: ordinary type and self-adhesive type. It is suitable for the production of various markings, arrows, text, patterns, colored ground signs, colored three-dimensional signs, pipeline signs, self-adhesive parking plates, and ground advertising.
Construction requirements: construction is simple and fast. The construction road must be clean, dry and level. Use in an environment where the air temperature is not lower than 5 ° C and the ground temperature is not lower than 10 ° C.
Engineering anti-fouling tape
The surface of this tape has been treated with a special process. The surface does not have glass beads and is smooth and flat. It has a good self-cleaning effect. Generally there are two types: ordinary type and adhesive type.
Especially in supermarkets, factories, squares and other places with high requirements for cleanliness.
Temporary anti-cursor band
Both the substrate and the surface of this tape have glass microbeads, which have the effect of reflecting light and sliding. The back of the product is provided with a primer, which can be directly adhered to the ground or wall. It is suitable for making various markings, arrows, text, and patterns.
Use: It is a short-acting product when it is used for temporary diversion. According to different road conditions and traffic volume, it is directly stuck to the ground, and its service life is usually 1-3 months.
-It is a long-acting product used on various floors and walls without rolling vehicles indoors and outdoors. Its service life is usually more than 2 years.
Temporary antifouling tape
The surface of this tape has been treated with a special process. The surface does not have glass beads and is smooth and flat. It has a good self-cleaning effect. The back of the product is provided with a primer, which can be directly adhered to the ground or wall. It is suitable for making various markings, arrows, text, and patterns.
It is used on various floors and walls without rolling vehicles indoors and outdoors. It is a long-term product, and its service life is usually more than 2 years.
Applicable roads: Suitable for various pavements and walls such as asphalt, cement, concrete, and marble. Especially in supermarkets, factories, airports, exhibition halls and other places that require high cleanliness.
Can be directly pasted for indoor or vehicle rolling.
Contact Now
